Tell us your requirements for Nckel Alloy 200/201 Stock – Alloy 200/201 Pipes, Alloy 201 Sheets, Fittings and Flanges.

Rich Stock, Quick Delivery. High Quality – We are a professional Alloy 200/201 pipe fittings and flanges manufacturer, located in India. We specialize in the manufacture of a wide variety of Alloy 200/201 pipe fittings including elbows, bends, tees, crosses, reducers, caps and more. We operate a full line service center for Nickel Alloy 200/201 plates, Alloy 200/201 sheets, Alloy 200/201 coils, Alloy 200/201 round bars and forgings. All products are manufactured in compliance to Indian standard, American standard ASME (ANSI), European standard EN, and German standard DIN.
100% Quality Tested Nickel Alloy 200/201 Material Stock Suppliers

As a professional Nickel Alloy 200/201 supplier in India, Metline has been in the metal industry for over 20 years.

Nickel Alloy 200/201 MaterialsStock, Supply and Manufacturing Range

We stock sufficient inventory for Alloy 200/201 materials, which are ready for delivery to our customers across the globe. Our product range includes Alloy 200/201 coils, sheets, strips, plates, round bars, pipe fittings, flanges, fasteners, valves, etc.

We can deliver Alloy 200/201 products from stock in about 7-10 days, making us one of the most specialized manufacturer and supplier from India.

If you are looking for Alloy 200/201 products in stock or fittings produced on your request, welcome to contact us!

Nickel Alloy 200/201
Alloy 200/201 Pipes & Tubes Alloy 200/201 Seamless Pipes Alloy 200/201 Tubing Alloy 200/201 Pipe Fittings
Alloy 200/201 Flanges Alloy 200/201 Heat Exchanger Tubes Alloy 200/201 Pipes Stock Alloy 200/201 Forging Stock
Alloy 200/201 Round Bars Alloy 200/201 Sheets & Plates Alloy 200/201 Pipe Fittings Alloy 200/201 Bars & Rods
Alloy 200/201 Blocks Alloy 200/201 Fasteners Alloy 200/201 Wire Alloy 200/201 Nuts & Bolts
Alloy 200/201 Tube Fittings Alloy 200/201 Valves Alloy 200/201 Coils & Strips
  • Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. Metline Industries ( is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source (s). Names are listed solely for reference to help identify products consistent with listed specifications.

About Nickel Alloy 200/201

Designated as UNS N02200 & W.Nr. 2.4060 & 2.4066, Nickel 200 or Ni 200 is 99.6% commercially pure wrought nickel. Nickel 200 has excellent resistance to many corrosive environments and good mechanical properties. Other useful features of Nickel 200 are its magnetic and magnetostrictive properties, low gas content, high thermal and electrical conductivities and low vapor pressure.

Designated as UNS N02201 or W.Nr. 2.4061 & 2.4068, Nickel 201 is has almost identical chemical composition as Nickel 200 except the lower-carbon content. Nickel 201 is typically applied in caustic evaporators, combustion boats, plater bars, as well as electronic components. Compared to Nickel 200, Nickel 201 has much lower base hardness and lower work-hardening rate hence is particularly suited for spinning and cold forming. According to ASME Boiler and Pressure Vessel Code Section VIII-Division 1, Nickel 201 is approved for construction of pressure vessels for service up to 1250°F. Its mechanical properties also vary depending on the manufacture process and heat treatment conditions.

Metline is a leading supplier of Nickel 200/Nickel 201 and other high-quality special metal alloys with decades of experience and extensive specifications.

Product Forms and Standards for Nickel 200/201

Nickel 200: Product Forms and Relative Standards
Products form Standard
Rod and bar ASTM B160, DIN 17752, ISO9723
Pipe and Tube ASTM B161, B163, B725, B730, B751, B775, B829, DIN 17751, ISO 6207
Plate, Sheet & Strip ASTM B162, DIN 17750, ISO 6208
Fittings ASTM B366
Forgings ASTM B564, ISO 9725, DIN17754
Wire DIN 17753, ISO 9724

Equivalents of Nickel Alloy 200/201

Standard Nickel 200 Nickel 201
1 UNS N02200 N02201
2 Werkstoff Nr. 2.4066 2.4068

Chemical Composition of Nickel Alloy 200/201

Nickel 200 Nickel 201
Ni 99.0 min 99.0 min
Fe 0.4 max 0.4 max
C 0.15 max 0.02 max
Mn 0.35 max 0.35 max
Si 0.1 max 0.2 max
Cu 0.25 max 0.25 max
Mg 0.15 max
Ti 0.1 max
S 0.01 max 0.01 max

Mechanical & Physical Properties of Nickel Alloy 200/201

Density, g/cm³ 8.89
Melting range, °C 1300 – 1350
Tensile strength, min, Mpa 550
Yield strength, 0.2% offset, min, Mpa 240
Elongation, %, min 40
Hardness, Rockwell 60-80

Nickel Alloy 200/201 Specifications

Specifications for Nickel 200 include the following:

  • Nickel Alloy 200/201 Rod and bar: ASTM B 160/ ASME SB 160, DIN 17752, ISO 9723, VdTÜV 345.
  • Nickel Alloy 200/201 Pipe and Tube: ASTM B 161/ ASME SB161, B 163/ SB 163, B 725/ SB 725, B730/ SB 730, B 751/ SB 751, B775/ SB 775, B 829/ SB 829, DIN 17751, ISO 6207, BS 3074 (NA12), VdTÜV 345.
  • Nickel Alloy 200/201 Plate, Sheet & Strip: ASTM B 162/ ASME SB 162, DIN 17750, ISO 6208, BS 3072-3073 (NA12), SAE AMS 5553, VdTÜV 345.
  • Nickel Alloy 200/201 Fittings: ASTM B 366/ ASME SB 366
  • Nickel Alloy 200/201 Forgings: ISO 9725, DIN 17754
  • Nickel Alloy 200/201 Chemical Composition: DIN 17740
  • Nickel Alloy 200/201 Wire: DIN 17753, ISO 9724